Skip to content
LicenseReciprocity

Plumber License from Georgia to District of Columbia: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: District of Columbia Board of Industrial Trades — Department of Licensing and Consumer Protection (DLCP), Occupational and Professional Licensing ↗

A plumbing license transfers from Georgia to District of Columbia by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the District of Columbia Board of Industrial Trades — Department of Licensing and Consumer Protection (DLCP), Occupational and Professional Licensing, verify your Georgia license, and meet District of Columbia's endorsement requirements. The District has no state-to-state plumber reciprocity — the Maryland/Virginia trade reciprocity DLCP publishes applies to electricians, not plumbers. DC waives its journeyman plumber examination only for applicants who prove completion of a nationally-certified apprenticeship program; all other applicants qualify by documenting experience (journeyman: 4 years / 8,000 work hours) and must pass the DC journeyman plumbing exam (open-book on the 2012 International Plumbing Code and 2012 International Fuel Gas Code). The master tier requires 8 years / 16,000 hours and its own exam.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

Georgia is not among the states District of Columbia names for an automatic exam waiver, so this move runs on the District of Columbia Board of Industrial Trades — Department of Licensing and Consumer Protection (DLCP), Occupational and Professional Licensing's individual endorsement or equivalency review rather than a guarantee. The District has no state-to-state plumber reciprocity — the Maryland/Virginia trade reciprocity DLCP publishes applies to electricians, not plumbers. DC waives its journeyman plumber examination only for applicants who prove completion of a nationally-certified apprenticeship program; all other applicants qualify by documenting experience (journeyman: 4 years / 8,000 work hours) and must pass the DC journeyman plumbing exam (open-book on the 2012 International Plumbing Code and 2012 International Fuel Gas Code). The master tier requires 8 years / 16,000 hours and its own exam. Bring your Georgia license, proof that it is active and in good standing, and your apprenticeship and exam records — and get any discretionary exam or experience credit in writing before you rely on it.

What changes, Georgia → District of Columbia

Side-by-side: Georgia vs District of Columbia (Plumber (journeyman/master)), verified 2026-07-21
Georgia (current)District of Columbia (destination)
Application fee$80–$160 (Journeyman ~$80 ($70 application + $10 processing); master ~$160 ($150 application + $10 processing) per the Division's plumbing exam/initial-application form. Examination administered by PSI with a separate exam fee paid to PSI; that exam is waived only for a qualifying reciprocity applicant under Rule 121-2-.03. Fee figures obtained via search extraction of the Division's official forms because the sos.ga.gov fee-schedule PDF returned HTTP 403 on direct load)$175 (Journeyman: $65 application + $110 initial license (up to 2 years) = $175. Master: $65 + $120 = $185. Apprentice license $110. Renewals: journeyman $110, master $155)
Processing timeNo board-stated processing time in weeks; the Division publishes exam dates and application deadlines and an application must be approved before the scheduled examinationNo board-stated processing time
Licensing authorityGeorgia State Construction Industry Licensing Board — Division of Master and Journeyman Plumbers (Office of the Secretary of State)District of Columbia Board of Industrial Trades — Department of Licensing and Consumer Protection (DLCP), Occupational and Professional Licensing

The destination column is what you must satisfy — District of Columbia sets the rules for this move.

Step by step

  1. Confirm District of Columbia's current requirements on the District of Columbia Board of Industrial Trades — Department of Licensing and Consumer Protection (DLCP), Occupational and Professional Licensing website (linked below) — rules change.
  2. Submit the endorsement application to the District of Columbia Board of Industrial Trades — Department of Licensing and Consumer Protection (DLCP), Occupational and Professional Licensing (application linked below).
  3. Arrange license verification from your current state via the verification system.
  4. Journeyman: document 4 years / 8,000 work hours (tax records and employment-verification letter), OR waive the journeyman exam with proof of completing a nationally-certified apprenticeship program.
  5. Master: document 8 years / 16,000 hours and pass the master exam.
  6. Provide a passport-style photo and government-issued ID and apply online through the Board of Industrial Trades.
  7. Pay the fees ($175 (Journeyman: $65 application + $110 initial license (up to 2 years) = $175. Master: $65 + $120 = $185. Apprentice license $110. Renewals: journeyman $110, master $155)) and allow No board-stated processing time.

Official links

Related guides

Frequently asked questions

Does District of Columbia accept a Georgia plumbing license?

A plumbing license transfers from Georgia to District of Columbia by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the District of Columbia Board of Industrial Trades — Department of Licensing and Consumer Protection (DLCP), Occupational and Professional Licensing, verify your Georgia license, and meet District of Columbia's endorsement requirements. The District has no state-to-state plumber reciprocity — the Maryland/Virginia trade reciprocity DLCP publishes applies to electricians, not plumbers. DC waives its journeyman plumber examination only for applicants who prove completion of a nationally-certified apprenticeship program; all other applicants qualify by documenting experience (journeyman: 4 years / 8,000 work hours) and must pass the DC journeyman plumbing exam (open-book on the 2012 International Plumbing Code and 2012 International Fuel Gas Code). The master tier requires 8 years / 16,000 hours and its own exam.

Which exam applies moving from Georgia to District of Columbia?

The District has no state-to-state plumber reciprocity — the Maryland/Virginia trade reciprocity DLCP publishes applies to electricians, not plumbers. DC waives its journeyman plumber examination only for applicants who prove completion of a nationally-certified apprenticeship program; all other applicants qualify by documenting experience (journeyman: 4 years / 8,000 work hours) and must pass the DC journeyman plumbing exam (open-book on the 2012 International Plumbing Code and 2012 International Fuel Gas Code). The master tier requires 8 years / 16,000 hours and its own exam.

What does the Georgia-to-District of Columbia move cost and how long does it take?

$175 (Journeyman: $65 application + $110 initial license (up to 2 years) = $175. Master: $65 + $120 = $185. Apprentice license $110. Renewals: journeyman $110, master $155); processing No board-stated processing time.

Can I keep my Georgia plumbing license after I'm licensed in District of Columbia?

Yes — plumbing licenses in different jurisdictions run independently. Keep the Georgia credential active on its own renewal and continuing-education schedule and you hold both, which is common for plumbers working near a state line.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]