Skip to content
LicenseReciprocity

Engineering License from Wisconsin to North Carolina: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) ↗

A PE license transfers from Wisconsin to North Carolina by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS), verify your Wisconsin license, and meet North Carolina's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; North Carolina has no separate state jurisprudence or law exam.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

North Carolina grants PE licensure by comity, so a Professional Engineer licensed in Wisconsin does not start over — but does file a full North Carolina application. Your Wisconsin license, ABET degree, qualifying experience, and FE and PE results reach the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) through your NCEES Record; the board's task is to confirm they meet North Carolina's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; North Carolina has no separate state jurisprudence or law exam. Two things govern your timeline: keeping your Wisconsin license active and unencumbered while the North Carolina application is pending, and clearing any North Carolina-specific exam or statutes review before the license issues.

What changes, Wisconsin → North Carolina

Side-by-side: Wisconsin vs North Carolina (Engineering (PE)), verified 2026-07-21
Wisconsin (current)North Carolina (destination)
Application fee$55 (Wisconsin PE reciprocity/credential application fee is $55 (paid via the online LicensE portal). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES. The biennial renewal fee is billed separately.)$100 (NC comity application fee (non-refundable); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES)
Processing timeDSPS presents a completed reciprocity application to the Professional Engineers Section for review at its next scheduled meeting; no fixed turnaround is published, so timing depends on the board's meeting schedule.NCBELS publishes no comity turnaround; comity applications are administratively approved by the Executive Director once the NCEES Record and references are received (NCEES Record completion itself averages 2-3 weeks)
Licensing authorityExamining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers — Professional Engineers Section (Wisconsin Department of Safety and Professional Services)North Carolina Board of Examiners for Engineers and Surveyors (NCBELS)

The destination column is what you must satisfy — North Carolina sets the rules for this move.

Step by step

  1. Confirm North Carolina's current requirements on the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) website (linked below) — rules change.
  2. Submit the endorsement application to the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) (application linked below).
  3. Arrange license verification from your current state via the verification system.
  4. Hold an active PE license in another U.S. jurisdiction based on comparable qualifications.
  5. Submit an NCEES Record (or complete the education, experience, and reference sections of the application directly).
  6. Provide professional reference forms and show no record of disciplinary action.
  7. Pay the fees ($100 (NC comity application fee (non-refundable); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES)) and allow NCBELS publishes no comity turnaround; comity applications are administratively approved by the Executive Director once the NCEES Record and references are received (NCEES Record completion itself averages 2-3 weeks).

Official links

Related guides

Frequently asked questions

Does North Carolina accept a Wisconsin PE license?

A PE license transfers from Wisconsin to North Carolina by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the North Carolina Board of Examiners for Engineers and Surveyors (NCBELS), verify your Wisconsin license, and meet North Carolina's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; North Carolina has no separate state jurisprudence or law exam.

Do I retake the FE or PE exam moving from Wisconsin to North Carolina?

FE and PE exam results transfer through your NCEES Record and are not retaken; North Carolina has no separate state jurisprudence or law exam.

What does the Wisconsin-to-North Carolina comity application cost?

$100 (NC comity application fee (non-refundable); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES).

Can I keep my Wisconsin PE license after I'm licensed in North Carolina?

Yes — PE licenses stack. Keep the Wisconsin license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]