Engineering License from Virginia to California: Does It Transfer? (2026)
Last verified: 2026-09-01 · source: California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) ↗
A PE license transfers from Virginia to California by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG), verify your Virginia license, and meet California's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
California grants PE licensure by comity, so a Professional Engineer licensed in Virginia does not start over — but does file a full California application. Your Virginia license, ABET degree, qualifying experience, and FE and PE results reach the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) through your NCEES Record; the board's task is to confirm they meet California's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical). Two things govern your timeline: keeping your Virginia license active and unencumbered while the California application is pending, and clearing any California-specific exam or statutes review before the license issues.
What changes, Virginia → California
| Virginia (current) | California (destination) | |
|---|---|---|
| Application fee | $134.5 ($134.50 is the total application fee DPOR collects for a Virginia PE license by endorsement (comity), transaction code 1021, per the board's current application form A416-0402LIC-v9 (effective 07/01/2026); application by examination is the same $134.50. The underlying "Application for Professional Engineer License by Endorsement" fee set by 18VAC10-20-170 is $120, and DPOR's form footnotes the amount charged to the technology fee it is directed to collect under 2026 House Bill 30 ($7.25 per year). Application fees are nonrefundable and are not prorated, and are paid to the Treasurer of Virginia. Separate from this fee: license renewal ($160 under 18VAC10-20-170), FE/PE exam fees paid to NCEES, and NCEES Record transmittal ($175 first board / $100 each additional, paid to NCEES). Reinstatement of a Virginia PE license that expired five or more years ago is $474.50.) | $175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026)) |
| Processing time | APELSCIDLA/DPOR publishes no comity turnaround on reachable pages; comity applications are reviewed by board staff once the education, experience, examination, and license verifications are received. | No board-published comity turnaround; the application undergoes technical review and the applicant becomes eligible for any required state-specific exams (offered in limited quarterly windows) only after that review is approved, so total time varies widely |
| Licensing authority | Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA), Virginia Department of Professional and Occupational Regulation (DPOR) | California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) |
The destination column is what you must satisfy — California sets the rules for this move.
Step by step
- Confirm California's current requirements on the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) website (linked below) — rules change.
- Submit the endorsement application to the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold a PE license from another state obtained under requirements the Board deems equivalent to California's.
- Apply through BPELSG Connect and verify out-of-state licensure and exams via NCEES (an NCEES Record may replace references and transcripts for comity applicants).
- Pass the California Laws and Rules Examination.
- Civil engineers only: pass the California Seismic Principles and Engineering Surveying exams.
- Underlying standard: qualifying engineering education plus qualifying experience per Business & Professions Code sections 6751(c) and 6753.
- Pay the fees ($175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026))) and allow No board-published comity turnaround; the application undergoes technical review and the applicant becomes eligible for any required state-specific exams (offered in limited quarterly windows) only after that review is approved, so total time varies widely.
Official links
Related guides
Frequently asked questions
Does California accept a Virginia PE license?
A PE license transfers from Virginia to California by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG), verify your Virginia license, and meet California's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical).
Do I retake the FE or PE exam moving from Virginia to California?
FE and PE exam results transfer through your NCEES Record and are not retaken; however, every PE applicant (including comity) must complete California's Laws and Rules Examination on the Professional Engineers Act (B&P Code 6700-6799) and Board Rules (16 CCR 400-476), which appears on the applicant dashboard after the application is submitted; civil-engineering applicants must also pass the California-specific Seismic Principles and Engineering Surveying exams (these two do NOT apply to non-civil disciplines such as mechanical or electrical).
What does the Virginia-to-California comity application cost?
$175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026)).
Can I keep my Virginia PE license after I'm licensed in California?
Yes — PE licenses stack. Keep the Virginia license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-09-01.
- California BPELSG — Application Fees (PE $175, rising to $250 on 7/1/2026; state exam fees) ↗ (accessed 2026-07-21)
- California BPELSG — Licensee Fee Schedule (renewal $180 -> $250 on 7/1/2026) ↗ (accessed 2026-07-21)
- California BPELSG — PE Application Instructions (Laws & Rules exam; comity NCEES Record option) ↗ (accessed 2026-07-21)
- California BPELSG — Professional Engineer Application overview (comity applicants) ↗ (accessed 2026-07-21)
- Virginia Administrative Code 18VAC10-20-270 — Licensure by comity (Cornell LII reproduction of the official Virginia code) ↗ (accessed 2026-07-21)
- Virginia Administrative Code 18VAC10-20-170 — Fee schedule, pre-8/1/2025 (Cornell LII reproduction) ↗ (accessed 2026-07-21)
- Virginia Administrative Code 18VAC10-20-270 (official portal — unreachable at research time, cited as authority) ↗ (accessed 2026-07-21)
- Virginia Administrative Code 18VAC10-20-170 — Fee schedule (official Virginia Law portal; text current as of 9/1/2026, last amended eff. May 1, 2026) ↗ (accessed 2026-09-01)
- Virginia DPOR — Professional Engineer License Application A416-0402LIC-v9 (eff. 07/01/2026), method of licensure fee table ↗ (accessed 2026-09-01)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-09-01
How we verify · All sources · spot an error? [email protected]