Engineering License from Texas to Montana: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) ↗
A PE license transfers from Texas to Montana by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division), verify your Texas license, and meet Montana's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Montana requires no state seismic or surveying exam, but every comity applicant must complete the Board's PE Laws and Rules questionnaire in full.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Montana grants PE licensure by comity, so a Professional Engineer licensed in Texas does not start over — but does file a full Montana application. Your Texas license, ABET degree, qualifying experience, and FE and PE results reach the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) through your NCEES Record; the board's task is to confirm they meet Montana's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; Montana requires no state seismic or surveying exam, but every comity applicant must complete the Board's PE Laws and Rules questionnaire in full. Two things govern your timeline: keeping your Texas license active and unencumbered while the Montana application is pending, and clearing any Montana-specific exam or statutes review before the license issues.
What changes, Texas → Montana
| Texas (current) | Montana (destination) | |
|---|---|---|
| Application fee | $75 (TBPELS PE license application fee (covers the Texas Ethics of Engineering exam); a fingerprint-based criminal-history check is also required (fee paid to the state's fingerprint vendor). Transmitting an NCEES Record costs $175 first board / $100 each additional, paid separately to NCEES. Renewal is $100 for two years.) | $75 (Montana PE comity application fee (checks payable to the Board of PE & PLS); biennial renewal is also $75. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES) |
| Processing time | ~8 weeks (TBPELS states an average application processing time of about two months (eight weeks) on its PE Application Process page, depending on the adequacy of the submittal; the ethics exam, NCEES Record, and fingerprint TX DPS/FBI criminal-history check must all clear before licensure (outgoing verification requests can separately take up to 30 business days).) | Board publishes no comity turnaround; contact DLI Business Standards at (406) 444-6880 for current timelines |
| Licensing authority | Texas Board of Professional Engineers and Land Surveyors (TBPELS) | Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) |
The destination column is what you must satisfy — Montana sets the rules for this move.
Step by step
- Confirm Montana's current requirements on the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) website (linked below) — rules change.
- Submit the endorsement application to the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold an active out-of-state PE license and apply by comity under MCA 37-67-312 / 37-67-323 via the state online portal, with prior passage of the NCEES PE exam.
- Have NCEES transmit your NCEES Record to the board; foreign degrees must be evaluated by NCEES.
- Provide five character references, three of which must be from U.S.-licensed Professional Engineers.
- Complete the Board's PE Laws and Rules questionnaire; if licensed elsewhere with less experience than Montana requires, show post-licensure experience equal to twice the deficit (MCA 37-67-312, 2015 amendment).
- Pay the fees ($75 (Montana PE comity application fee (checks payable to the Board of PE & PLS); biennial renewal is also $75. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)) and allow Board publishes no comity turnaround; contact DLI Business Standards at (406) 444-6880 for current timelines.
Official links
Related guides
Frequently asked questions
Does Montana accept a Texas PE license?
A PE license transfers from Texas to Montana by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division), verify your Texas license, and meet Montana's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Montana requires no state seismic or surveying exam, but every comity applicant must complete the Board's PE Laws and Rules questionnaire in full.
Do I retake the FE or PE exam moving from Texas to Montana?
FE and PE exam results transfer through your NCEES Record and are not retaken; Montana requires no state seismic or surveying exam, but every comity applicant must complete the Board's PE Laws and Rules questionnaire in full.
What does the Texas-to-Montana comity application cost?
$75 (Montana PE comity application fee (checks payable to the Board of PE & PLS); biennial renewal is also $75. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES).
Can I keep my Texas PE license after I'm licensed in Montana?
Yes — PE licenses stack. Keep the Texas license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- Montana Board of PE & PLS — Professional Engineer license information (comity, $75 fee) ↗ (accessed 2026-07-21)
- Montana Board of PE & PLS — PE Application with NCEES Record (comity requirements, laws-and-rules questionnaire, references) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity transmittal fees) ↗ (accessed 2026-07-21)
- TBPELS — Basic Licensure Requirements ↗ (accessed 2026-07-21)
- TBPELS — Exam Waiver Requirements ↗ (accessed 2026-07-21)
- TBPELS — PE Application Process ↗ (accessed 2026-07-21)
- TBPELS — Agency Fees ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]