Engineering License from Ohio to Washington: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing ↗
A PE license transfers from Ohio to Washington by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing, verify your Ohio license, and meet Washington's endorsement requirements. FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; comity applicants must additionally pass the open-book Washington Engineer Law Review (minimum score 80%).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Washington grants PE licensure by comity, so a Professional Engineer licensed in Ohio does not start over — but does file a full Washington application. Your Ohio license, ABET degree, qualifying experience, and FE and PE results reach the Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing through your NCEES Record; the board's task is to confirm they meet Washington's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; comity applicants must additionally pass the open-book Washington Engineer Law Review (minimum score 80%). Two things govern your timeline: keeping your Ohio license active and unencumbered while the Washington application is pending, and clearing any Washington-specific exam or statutes review before the license issues.
What changes, Ohio → Washington
| Ohio (current) | Washington (destination) | |
|---|---|---|
| Application fee | $415 (Engineering reciprocity (comity) application fee from the board's published fee schedule; a $50 PE final registration fee is due on issuance and renewal is $40 per biennium. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.) | $110 (Washington PE comity registration application fee is $110 (payable to the Department of Licensing; includes license and wall certificate). Biennial renewal is $128. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES.) |
| Processing time | The board publishes no comity turnaround on a directly accessible page; comity applications are reviewed administratively once the out-of-state verification/NCEES Record is received (NCEES Record completion itself averages 2-3 weeks). | ~4 weeks (BRPELS issues new licenses the first week of each month and asks applicants to contact the office only if more than 4 weeks have passed; transmitting an NCEES Record is the preferred, faster path but does not generate automatic approval.) |
| Licensing authority | Ohio State Board of Registration for Professional Engineers and Surveyors | Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing |
The destination column is what you must satisfy — Washington sets the rules for this move.
Step by step
- Confirm Washington's current requirements on the Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing website (linked below) — rules change.
- Submit the endorsement application to the Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold an active engineering license issued by another NCEES member board, in good standing.
- Have passed the NCEES FE and PE examinations, with results verified through your NCEES Record or the issuing board.
- Pass the open-book Washington Engineer Law Review with a score of at least 80%.
- Document 8 years of progressive engineering experience under a licensed PE (an ABET-accredited engineering degree counts as 4 years).
- Pay the fees ($110 (Washington PE comity registration application fee is $110 (payable to the Department of Licensing; includes license and wall certificate). Biennial renewal is $128. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES.)) and allow ~4 weeks (BRPELS issues new licenses the first week of each month and asks applicants to contact the office only if more than 4 weeks have passed; transmitting an NCEES Record is the preferred, faster path but does not generate automatic approval.).
Official links
Related guides
Frequently asked questions
Does Washington accept a Ohio PE license?
A PE license transfers from Ohio to Washington by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Washington State Board of Registration for Professional Engineers and Land Surveyors (BRPELS), Washington State Department of Licensing, verify your Ohio license, and meet Washington's endorsement requirements. FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; comity applicants must additionally pass the open-book Washington Engineer Law Review (minimum score 80%).
Do I retake the FE or PE exam moving from Ohio to Washington?
FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; comity applicants must additionally pass the open-book Washington Engineer Law Review (minimum score 80%).
What does the Ohio-to-Washington comity application cost?
$110 (Washington PE comity registration application fee is $110 (payable to the Department of Licensing; includes license and wall certificate). Biennial renewal is $128. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES.).
Can I keep my Ohio PE license after I'm licensed in Washington?
Yes — PE licenses stack. Keep the Ohio license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- BRPELS — Professional Engineer by Comity ↗ (accessed 2026-07-21)
- BRPELS — Fees (PE comity $110; PE renewal $128) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure; $175 first board / $100 each additional) ↗ (accessed 2026-07-21)
- Ohio State Board of Registration for PE&S - Board Fees ↗ (accessed 2026-07-21)
- Ohio Admin. Code 4733-13-01 - Comity and temporary registration ↗ (accessed 2026-07-21)
- Ohio Rev. Code 4733.19 - Reciprocity ↗ (accessed 2026-07-21)
- NCEES - Records Program (comity licensure) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]