Engineering License from North Carolina to Montana: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) ↗
A PE license transfers from North Carolina to Montana by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division), verify your North Carolina license, and meet Montana's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Montana requires no state seismic or surveying exam, but every comity applicant must complete the Board's PE Laws and Rules questionnaire in full.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Montana grants PE licensure by comity, so a Professional Engineer licensed in North Carolina does not start over — but does file a full Montana application. Your North Carolina license, ABET degree, qualifying experience, and FE and PE results reach the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) through your NCEES Record; the board's task is to confirm they meet Montana's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; Montana requires no state seismic or surveying exam, but every comity applicant must complete the Board's PE Laws and Rules questionnaire in full. Two things govern your timeline: keeping your North Carolina license active and unencumbered while the Montana application is pending, and clearing any Montana-specific exam or statutes review before the license issues.
What changes, North Carolina → Montana
| North Carolina (current) | Montana (destination) | |
|---|---|---|
| Application fee | $100 (NC comity application fee (non-refundable); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES) | $75 (Montana PE comity application fee (checks payable to the Board of PE & PLS); biennial renewal is also $75. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES) |
| Processing time | NCBELS publishes no comity turnaround; comity applications are administratively approved by the Executive Director once the NCEES Record and references are received (NCEES Record completion itself averages 2-3 weeks) | Board publishes no comity turnaround; contact DLI Business Standards at (406) 444-6880 for current timelines |
| Licensing authority | North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) | Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) |
The destination column is what you must satisfy — Montana sets the rules for this move.
Step by step
- Confirm Montana's current requirements on the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) website (linked below) — rules change.
- Submit the endorsement application to the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold an active out-of-state PE license and apply by comity under MCA 37-67-312 / 37-67-323 via the state online portal, with prior passage of the NCEES PE exam.
- Have NCEES transmit your NCEES Record to the board; foreign degrees must be evaluated by NCEES.
- Provide five character references, three of which must be from U.S.-licensed Professional Engineers.
- Complete the Board's PE Laws and Rules questionnaire; if licensed elsewhere with less experience than Montana requires, show post-licensure experience equal to twice the deficit (MCA 37-67-312, 2015 amendment).
- Pay the fees ($75 (Montana PE comity application fee (checks payable to the Board of PE & PLS); biennial renewal is also $75. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)) and allow Board publishes no comity turnaround; contact DLI Business Standards at (406) 444-6880 for current timelines.
Official links
Related guides
Frequently asked questions
Does Montana accept a North Carolina PE license?
A PE license transfers from North Carolina to Montana by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Montana Board of Professional Engineers and Professional Land Surveyors (Department of Labor & Industry, Business Standards Division), verify your North Carolina license, and meet Montana's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Montana requires no state seismic or surveying exam, but every comity applicant must complete the Board's PE Laws and Rules questionnaire in full.
Do I retake the FE or PE exam moving from North Carolina to Montana?
FE and PE exam results transfer through your NCEES Record and are not retaken; Montana requires no state seismic or surveying exam, but every comity applicant must complete the Board's PE Laws and Rules questionnaire in full.
What does the North Carolina-to-Montana comity application cost?
$75 (Montana PE comity application fee (checks payable to the Board of PE & PLS); biennial renewal is also $75. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES).
Can I keep my North Carolina PE license after I'm licensed in Montana?
Yes — PE licenses stack. Keep the North Carolina license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- Montana Board of PE & PLS — Professional Engineer license information (comity, $75 fee) ↗ (accessed 2026-07-21)
- Montana Board of PE & PLS — PE Application with NCEES Record (comity requirements, laws-and-rules questionnaire, references) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity transmittal fees) ↗ (accessed 2026-07-21)
- NCBELS — Initial or Comity PE Licensure ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]