Skip to content
LicenseReciprocity

Engineering License from North Carolina to Massachusetts: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: Massachusetts Board of Registration of Professional Engineers and Professional Land Surveyors (Division of Occupational Licensure) ↗

A PE license transfers from North Carolina to Massachusetts by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Massachusetts Board of Registration of Professional Engineers and Professional Land Surveyors (Division of Occupational Licensure), verify your North Carolina license, and meet Massachusetts's endorsement requirements. FE and PE exam results transfer through your NCEES Record (required of all comity applicants since August 2006) and are not retaken; a comity applicant may only be registered in the branch of engineering matching the NCEES exam discipline of their original license. Massachusetts has no separate state jurisprudence exam.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

Massachusetts grants PE licensure by comity, so a Professional Engineer licensed in North Carolina does not start over — but does file a full Massachusetts application. Your North Carolina license, ABET degree, qualifying experience, and FE and PE results reach the Massachusetts Board of Registration of Professional Engineers and Professional Land Surveyors (Division of Occupational Licensure) through your NCEES Record; the board's task is to confirm they meet Massachusetts's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record (required of all comity applicants since August 2006) and are not retaken; a comity applicant may only be registered in the branch of engineering matching the NCEES exam discipline of their original license. Massachusetts has no separate state jurisprudence exam. Two things govern your timeline: keeping your North Carolina license active and unencumbered while the Massachusetts application is pending, and clearing any Massachusetts-specific exam or statutes review before the license issues.

What changes, North Carolina → Massachusetts

Side-by-side: North Carolina vs Massachusetts (Engineering (PE)), verified 2026-07-21
North Carolina (current)Massachusetts (destination)
Application fee$100 (NC comity application fee (non-refundable); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES)$164–$314 (Comity application fee is $164, paid to Professional Credential Services (PCS), the Board's designated application administrator; the $150 registration fee is assessed after Board approval (= $314 total). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)
Processing timeNCBELS publishes no comity turnaround; comity applications are administratively approved by the Executive Director once the NCEES Record and references are received (NCEES Record completion itself averages 2-3 weeks)8–26 weeks (PCS/Board guidance: a decision usually takes no more than 2-3 months, but applicants are advised to allow up to 6 months. A temporary permit (30 days per calendar year, extendable up to 12 months while a comity application is pending) is available to an out-of-state licensed engineer)
Licensing authorityNorth Carolina Board of Examiners for Engineers and Surveyors (NCBELS)Massachusetts Board of Registration of Professional Engineers and Professional Land Surveyors (Division of Occupational Licensure)

The destination column is what you must satisfy — Massachusetts sets the rules for this move.

Step by step

  1. Confirm Massachusetts's current requirements on the Massachusetts Board of Registration of Professional Engineers and Professional Land Surveyors (Division of Occupational Licensure) website (linked below) — rules change.
  2. Submit the endorsement application to the Massachusetts Board of Registration of Professional Engineers and Professional Land Surveyors (Division of Occupational Licensure) (application linked below).
  3. Arrange license verification from your current state via the verification system.
  4. Hold an active PE registration in another U.S. jurisdiction.
  5. Obtain and submit an NCEES Record (required for all comity applicants).
  6. Apply only in the engineering discipline corresponding to your NCEES exam discipline.
  7. Submit the comity application, documents, and fees to Professional Credential Services (PCS), the Board's designated administrator, for processing before Board approval.
  8. Pay the fees ($164–$314 (Comity application fee is $164, paid to Professional Credential Services (PCS), the Board's designated application administrator; the $150 registration fee is assessed after Board approval (= $314 total). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)) and allow 8–26 weeks (PCS/Board guidance: a decision usually takes no more than 2-3 months, but applicants are advised to allow up to 6 months. A temporary permit (30 days per calendar year, extendable up to 12 months while a comity application is pending) is available to an out-of-state licensed engineer).

Official links

Related guides

Frequently asked questions

Does Massachusetts accept a North Carolina PE license?

A PE license transfers from North Carolina to Massachusetts by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Massachusetts Board of Registration of Professional Engineers and Professional Land Surveyors (Division of Occupational Licensure), verify your North Carolina license, and meet Massachusetts's endorsement requirements. FE and PE exam results transfer through your NCEES Record (required of all comity applicants since August 2006) and are not retaken; a comity applicant may only be registered in the branch of engineering matching the NCEES exam discipline of their original license. Massachusetts has no separate state jurisprudence exam.

Do I retake the FE or PE exam moving from North Carolina to Massachusetts?

FE and PE exam results transfer through your NCEES Record (required of all comity applicants since August 2006) and are not retaken; a comity applicant may only be registered in the branch of engineering matching the NCEES exam discipline of their original license. Massachusetts has no separate state jurisprudence exam.

What does the North Carolina-to-Massachusetts comity application cost?

$164–$314 (Comity application fee is $164, paid to Professional Credential Services (PCS), the Board's designated application administrator; the $150 registration fee is assessed after Board approval (= $314 total). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES).

Can I keep my North Carolina PE license after I'm licensed in Massachusetts?

Yes — PE licenses stack. Keep the North Carolina license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]