Engineering License from North Carolina to Alabama: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Alabama Board of Licensure for Professional Engineers and Land Surveyors (BELS) ↗
A PE license transfers from North Carolina to Alabama by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Alabama Board of Licensure for Professional Engineers and Land Surveyors (BELS), verify your North Carolina license, and meet Alabama's endorsement requirements. FE and PE exam results transfer through your NCEES Record (accepted for comity applicants) and are not retaken; Alabama has no separate state jurisprudence or law exam (its only state exam, on Land Surveying Standards, History and Law, applies to surveyors, not PEs).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Alabama grants PE licensure by comity, so a Professional Engineer licensed in North Carolina does not start over — but does file a full Alabama application. Your North Carolina license, ABET degree, qualifying experience, and FE and PE results reach the Alabama Board of Licensure for Professional Engineers and Land Surveyors (BELS) through your NCEES Record; the board's task is to confirm they meet Alabama's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record (accepted for comity applicants) and are not retaken; Alabama has no separate state jurisprudence or law exam (its only state exam, on Land Surveying Standards, History and Law, applies to surveyors, not PEs). Two things govern your timeline: keeping your North Carolina license active and unencumbered while the Alabama application is pending, and clearing any Alabama-specific exam or statutes review before the license issues.
What changes, North Carolina → Alabama
| North Carolina (current) | Alabama (destination) | |
|---|---|---|
| Application fee | $100 (NC comity application fee (non-refundable); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES) | $125 (Alabama comity application fee ($125 PE application fee, confirmed on both the board FAQ and the Admin. Code Ch. 330-X-4 fee schedule), submitted through the online portal (bels.learningbuilder.com); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES) |
| Processing time | NCBELS publishes no comity turnaround; comity applications are administratively approved by the Executive Director once the NCEES Record and references are received (NCEES Record completion itself averages 2-3 weeks) | 3–4 weeks (Board FAQ states a complete comity application with no anomalies or felonies is processed in roughly 3-4 weeks after it is complete and approved; disclosures or discrepancies extend this) |
| Licensing authority | North Carolina Board of Examiners for Engineers and Surveyors (NCBELS) | Alabama Board of Licensure for Professional Engineers and Land Surveyors (BELS) |
The destination column is what you must satisfy — Alabama sets the rules for this move.
Step by step
- Confirm Alabama's current requirements on the Alabama Board of Licensure for Professional Engineers and Land Surveyors (BELS) website (linked below) — rules change.
- Submit the endorsement application to the Alabama Board of Licensure for Professional Engineers and Land Surveyors (BELS) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold a current PE license in another U.S. state (comity).
- Submit an NCEES Record, or complete the board's experience, education, and reference sections directly.
- Provide proof of U.S. citizenship or qualifying alien status.
- Underlying standard: EAC/ABET-accredited engineering degree plus four years of progressive engineering experience.
- Pay the fees ($125 (Alabama comity application fee ($125 PE application fee, confirmed on both the board FAQ and the Admin. Code Ch. 330-X-4 fee schedule), submitted through the online portal (bels.learningbuilder.com); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES)) and allow 3–4 weeks (Board FAQ states a complete comity application with no anomalies or felonies is processed in roughly 3-4 weeks after it is complete and approved; disclosures or discrepancies extend this).
Official links
Related guides
Frequently asked questions
Does Alabama accept a North Carolina PE license?
A PE license transfers from North Carolina to Alabama by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Alabama Board of Licensure for Professional Engineers and Land Surveyors (BELS), verify your North Carolina license, and meet Alabama's endorsement requirements. FE and PE exam results transfer through your NCEES Record (accepted for comity applicants) and are not retaken; Alabama has no separate state jurisprudence or law exam (its only state exam, on Land Surveying Standards, History and Law, applies to surveyors, not PEs).
Do I retake the FE or PE exam moving from North Carolina to Alabama?
FE and PE exam results transfer through your NCEES Record (accepted for comity applicants) and are not retaken; Alabama has no separate state jurisprudence or law exam (its only state exam, on Land Surveying Standards, History and Law, applies to surveyors, not PEs).
What does the North Carolina-to-Alabama comity application cost?
$125 (Alabama comity application fee ($125 PE application fee, confirmed on both the board FAQ and the Admin. Code Ch. 330-X-4 fee schedule), submitted through the online portal (bels.learningbuilder.com); transmitting an NCEES Record to the board costs $175 for the first board and $100 for each additional board, paid separately to NCEES).
Can I keep my North Carolina PE license after I'm licensed in Alabama?
Yes — PE licenses stack. Keep the North Carolina license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- Alabama BELS — Frequently Asked Questions (comity fee, NCEES Record, processing) ↗ (accessed 2026-07-21)
- Alabama Admin. Code Ch. 330-X-4 — Fees (Appendix A; PE application fee $125, eff. 2025-02-14) ↗ (accessed 2026-07-21)
- Alabama BELS — Applications ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure) ↗ (accessed 2026-07-21)
- NCBELS — Initial or Comity PE Licensure ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]