Skip to content
LicenseReciprocity

Engineering License from New York to Kentucky: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: Kentucky State Board of Licensure for Professional Engineers and Land Surveyors (KYBOELS) ↗

A PE license transfers from New York to Kentucky by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Kentucky State Board of Licensure for Professional Engineers and Land Surveyors (KYBOELS), verify your New York license, and meet Kentucky's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Kentucky requires no separate state jurisprudence or law exam.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

Kentucky grants PE licensure by comity, so a Professional Engineer licensed in New York does not start over — but does file a full Kentucky application. Your New York license, ABET degree, qualifying experience, and FE and PE results reach the Kentucky State Board of Licensure for Professional Engineers and Land Surveyors (KYBOELS) through your NCEES Record; the board's task is to confirm they meet Kentucky's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; Kentucky requires no separate state jurisprudence or law exam. Two things govern your timeline: keeping your New York license active and unencumbered while the Kentucky application is pending, and clearing any Kentucky-specific exam or statutes review before the license issues.

What changes, New York → Kentucky

Side-by-side: New York vs Kentucky (Engineering (PE)), verified 2026-07-21
New York (current)Kentucky (destination)
Application fee$377 (NY fee for licensure and first registration is $377 (the same fee applies to the endorsement pathway); transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)$300 (Kentucky endorsement/comity application fee (nonrefundable), due when the application is submitted; no separate license fee until the first biennial renewal roughly two years later; transmitting an NCEES Record costs $175 for the first board and $100 for each additional board paid to NCEES)
Processing timeThe NYSED Office of the Professions does not publish a comity/endorsement processing time on its engineering pages2–6 weeks (Board states the review can take as little as two weeks but up to six weeks after a complete application and NCEES Record are received)
Licensing authorityNew York State Board for Engineering, Land Surveying and Geology (NYSED Office of the Professions)Kentucky State Board of Licensure for Professional Engineers and Land Surveyors (KYBOELS)

The destination column is what you must satisfy — Kentucky sets the rules for this move.

Step by step

  1. Confirm Kentucky's current requirements on the Kentucky State Board of Licensure for Professional Engineers and Land Surveyors (KYBOELS) website (linked below) — rules change.
  2. Submit the endorsement application to the Kentucky State Board of Licensure for Professional Engineers and Land Surveyors (KYBOELS) (application linked below).
  3. Arrange license verification from your current state via the verification system.
  4. Hold a PE license in another U.S. jurisdiction and establish an NCEES Record before applying (Kentucky requires the NCEES Record for endorsement/comity).
  5. Hold an EAC/ABET-accredited engineering degree (engineering-technology degrees accepted only with an accredited master's; foreign degrees need an NCEES Credentials Evaluation).
  6. Document at least four years of progressive engineering experience and passage of the FE and PE exams.
  7. Provide references and maintain a clean disciplinary record.
  8. Pay the fees ($300 (Kentucky endorsement/comity application fee (nonrefundable), due when the application is submitted; no separate license fee until the first biennial renewal roughly two years later; transmitting an NCEES Record costs $175 for the first board and $100 for each additional board paid to NCEES)) and allow 2–6 weeks (Board states the review can take as little as two weeks but up to six weeks after a complete application and NCEES Record are received).

Official links

Related guides

Frequently asked questions

Does Kentucky accept a New York PE license?

A PE license transfers from New York to Kentucky by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Kentucky State Board of Licensure for Professional Engineers and Land Surveyors (KYBOELS), verify your New York license, and meet Kentucky's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Kentucky requires no separate state jurisprudence or law exam.

Do I retake the FE or PE exam moving from New York to Kentucky?

FE and PE exam results transfer through your NCEES Record and are not retaken; Kentucky requires no separate state jurisprudence or law exam.

What does the New York-to-Kentucky comity application cost?

$300 (Kentucky endorsement/comity application fee (nonrefundable), due when the application is submitted; no separate license fee until the first biennial renewal roughly two years later; transmitting an NCEES Record costs $175 for the first board and $100 for each additional board paid to NCEES).

Can I keep my New York PE license after I'm licensed in Kentucky?

Yes — PE licenses stack. Keep the New York license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]