Engineering License from Michigan to Wyoming: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Wyoming Board of Professional Engineers and Professional Land Surveyors ↗
A PE license transfers from Michigan to Wyoming by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Wyoming Board of Professional Engineers and Professional Land Surveyors, verify your Michigan license, and meet Wyoming's endorsement requirements. FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; Wyoming additionally requires every comity applicant to pass a written examination on professional ethics and Wyoming licensing law (the Law and Ethics Exam), emailed after the application is submitted.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Wyoming grants PE licensure by comity, so a Professional Engineer licensed in Michigan does not start over — but does file a full Wyoming application. Your Michigan license, ABET degree, qualifying experience, and FE and PE results reach the Wyoming Board of Professional Engineers and Professional Land Surveyors through your NCEES Record; the board's task is to confirm they meet Wyoming's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; Wyoming additionally requires every comity applicant to pass a written examination on professional ethics and Wyoming licensing law (the Law and Ethics Exam), emailed after the application is submitted. Two things govern your timeline: keeping your Michigan license active and unencumbered while the Wyoming application is pending, and clearing any Wyoming-specific exam or statutes review before the license issues.
What changes, Michigan → Wyoming
| Michigan (current) | Wyoming (destination) | |
|---|---|---|
| Application fee | $75–$115 (Per the Michigan State License Fee Act (MCL 338.2213): a $35 application processing fee plus a license fee of $40 per year, prorated for the time remaining in the biennial cycle (up to $80), so the amount due at initial licensure by endorsement runs roughly $75-$115. Biennial renewal is $80. (Statute lowers these to a $30 application processing fee and $20/year license fee after Sept 30, 2027.) Transmitting an NCEES Record costs $175 first board / $100 each additional, paid separately to NCEES) | $100 (Wyoming comity application fee is $100 (the board's flat fee for all professional applications). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES.) |
| Processing time | LARA/Board publishes no comity turnaround; out-of-state (endorsement) applications are reviewed by the Board of Professional Engineers. NCEES Record completion itself averages 2-3 weeks | NCEES Model Law Engineer / Record holders are reviewed weekly by the Executive Director; other comity applications are reviewed at the next quarterly Board meeting, so timing varies. No fixed turnaround is published. |
| Licensing authority | Michigan Board of Professional Engineers (Department of Licensing and Regulatory Affairs, Bureau of Professional Licensing) | Wyoming Board of Professional Engineers and Professional Land Surveyors |
The destination column is what you must satisfy — Wyoming sets the rules for this move.
Step by step
- Confirm Wyoming's current requirements on the Wyoming Board of Professional Engineers and Professional Land Surveyors website (linked below) — rules change.
- Submit the endorsement application to the Wyoming Board of Professional Engineers and Professional Land Surveyors (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold a license to practice professional engineering issued by another jurisdiction.
- Have passed the NCEES FE and PE examinations.
- Pass the Wyoming Law and Ethics Exam (emailed after the comity application is submitted; the application is complete only once it is passed).
- Meet the education and experience standard: a four-year ABET-EAC-accredited engineering degree (or NCEES Education Standard equivalent) plus a minimum of four years of qualifying engineering experience.
- Pay the fees ($100 (Wyoming comity application fee is $100 (the board's flat fee for all professional applications). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES.)) and allow NCEES Model Law Engineer / Record holders are reviewed weekly by the Executive Director; other comity applications are reviewed at the next quarterly Board meeting, so timing varies. No fixed turnaround is published..
Official links
Related guides
Frequently asked questions
Does Wyoming accept a Michigan PE license?
A PE license transfers from Michigan to Wyoming by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Wyoming Board of Professional Engineers and Professional Land Surveyors, verify your Michigan license, and meet Wyoming's endorsement requirements. FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; Wyoming additionally requires every comity applicant to pass a written examination on professional ethics and Wyoming licensing law (the Law and Ethics Exam), emailed after the application is submitted.
Do I retake the FE or PE exam moving from Michigan to Wyoming?
FE and PE exam results transfer through your NCEES Record (or issuing-board verification) and are not retaken; Wyoming additionally requires every comity applicant to pass a written examination on professional ethics and Wyoming licensing law (the Law and Ethics Exam), emailed after the application is submitted.
What does the Michigan-to-Wyoming comity application cost?
$100 (Wyoming comity application fee is $100 (the board's flat fee for all professional applications). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES.).
Can I keep my Michigan PE license after I'm licensed in Wyoming?
Yes — PE licenses stack. Keep the Michigan license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- Wyoming Board of PE & PLS — Engineers Applications (comity: FE/PE, 4 yrs experience, ABET degree, Law & Ethics Exam) ↗ (accessed 2026-07-21)
- Wyoming Board of PE & PLS — Applications FAQ ($100 professional application fee; MLE Record reviewed weekly) ↗ (accessed 2026-07-21)
- Michigan LARA — Engineers, Professional (Board page) ↗ (accessed 2026-07-21)
- Michigan MCL 338.2213 — Architect, Professional Engineer, or Land Surveyor; Fees (State License Fee Act) ↗ (accessed 2026-07-21)
- Michigan LARA — Professional Engineer Licensing Guide (PDF) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]