Engineering License from Michigan to Minnesota: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience and Interior Design (AELSLAGID) ↗
A PE license transfers from Michigan to Minnesota by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience and Interior Design (AELSLAGID), verify your Michigan license, and meet Minnesota's endorsement requirements. FE and PE exam results transfer through your NCEES Record (or are verified via account.ncees.org) and are not retaken; Minnesota has no separate state jurisprudence or law exam for engineers.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Minnesota grants PE licensure by comity, so a Professional Engineer licensed in Michigan does not start over — but does file a full Minnesota application. Your Michigan license, ABET degree, qualifying experience, and FE and PE results reach the Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience and Interior Design (AELSLAGID) through your NCEES Record; the board's task is to confirm they meet Minnesota's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record (or are verified via account.ncees.org) and are not retaken; Minnesota has no separate state jurisprudence or law exam for engineers. Two things govern your timeline: keeping your Michigan license active and unencumbered while the Minnesota application is pending, and clearing any Minnesota-specific exam or statutes review before the license issues.
What changes, Michigan → Minnesota
| Michigan (current) | Minnesota (destination) | |
|---|---|---|
| Application fee | $75–$115 (Per the Michigan State License Fee Act (MCL 338.2213): a $35 application processing fee plus a license fee of $40 per year, prorated for the time remaining in the biennial cycle (up to $80), so the amount due at initial licensure by endorsement runs roughly $75-$115. Biennial renewal is $80. (Statute lowers these to a $30 application processing fee and $20/year license fee after Sept 30, 2027.) Transmitting an NCEES Record costs $175 first board / $100 each additional, paid separately to NCEES) | $75–$195 (Comity/EEE application fee is $75; upon approval the license fee is $120 (= $195 total). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES) |
| Processing time | LARA/Board publishes no comity turnaround; out-of-state (endorsement) applications are reviewed by the Board of Professional Engineers. NCEES Record completion itself averages 2-3 weeks | The Board does not publish a specific comity turnaround; completed comity applications are reviewed on a rolling basis (NCEES Record completion itself averages 2-3 weeks). EEE applicants have three years from the original application date to complete experience documentation or must reapply |
| Licensing authority | Michigan Board of Professional Engineers (Department of Licensing and Regulatory Affairs, Bureau of Professional Licensing) | Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience and Interior Design (AELSLAGID) |
The destination column is what you must satisfy — Minnesota sets the rules for this move.
Step by step
- Confirm Minnesota's current requirements on the Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience and Interior Design (AELSLAGID) website (linked below) — rules change.
- Submit the endorsement application to the Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience and Interior Design (AELSLAGID) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold an active PE license in another U.S. jurisdiction.
- Submit an NCEES Record, or otherwise provide FE/PE exam score verification, proof of out-of-state licensure, and education verification (transcripts or an education evaluation).
- Meet the underlying standard: an ABET-accredited engineering degree plus 4 years of qualifying engineering experience (one year = at least 12 months and 2,000 hours).
- Pay the fees ($75–$195 (Comity/EEE application fee is $75; upon approval the license fee is $120 (= $195 total). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)) and allow The Board does not publish a specific comity turnaround; completed comity applications are reviewed on a rolling basis (NCEES Record completion itself averages 2-3 weeks). EEE applicants have three years from the original application date to complete experience documentation or must reapply.
Official links
Related guides
Frequently asked questions
Does Minnesota accept a Michigan PE license?
A PE license transfers from Michigan to Minnesota by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience and Interior Design (AELSLAGID), verify your Michigan license, and meet Minnesota's endorsement requirements. FE and PE exam results transfer through your NCEES Record (or are verified via account.ncees.org) and are not retaken; Minnesota has no separate state jurisprudence or law exam for engineers.
Do I retake the FE or PE exam moving from Michigan to Minnesota?
FE and PE exam results transfer through your NCEES Record (or are verified via account.ncees.org) and are not retaken; Minnesota has no separate state jurisprudence or law exam for engineers.
What does the Michigan-to-Minnesota comity application cost?
$75–$195 (Comity/EEE application fee is $75; upon approval the license fee is $120 (= $195 total). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES).
Can I keep my Michigan PE license after I'm licensed in Minnesota?
Yes — PE licenses stack. Keep the Michigan license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- Minnesota Board of AELSLAGID — Professional Engineering (comity/EEE, fees) ↗ (accessed 2026-07-21)
- Minnesota Board of AELSLAGID — Professional Engineering Application by Comity or EEE (instructions PDF) ↗ (accessed 2026-07-21)
- Minnesota Rules ch. 1800 (Board of AELSLAGID) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure) ↗ (accessed 2026-07-21)
- Michigan LARA — Engineers, Professional (Board page) ↗ (accessed 2026-07-21)
- Michigan MCL 338.2213 — Architect, Professional Engineer, or Land Surveyor; Fees (State License Fee Act) ↗ (accessed 2026-07-21)
- Michigan LARA — Professional Engineer Licensing Guide (PDF) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]