Engineering License from Michigan to Iowa: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) ↗
A PE license transfers from Michigan to Iowa by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing), verify your Michigan license, and meet Iowa's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Iowa requires no separate state exam, though comity applicants must complete an ethics questionnaire (not a proctored exam).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Iowa grants PE licensure by comity, so a Professional Engineer licensed in Michigan does not start over — but does file a full Iowa application. Your Michigan license, ABET degree, qualifying experience, and FE and PE results reach the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) through your NCEES Record; the board's task is to confirm they meet Iowa's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; Iowa requires no separate state exam, though comity applicants must complete an ethics questionnaire (not a proctored exam). Two things govern your timeline: keeping your Michigan license active and unencumbered while the Iowa application is pending, and clearing any Iowa-specific exam or statutes review before the license issues.
What changes, Michigan → Iowa
| Michigan (current) | Iowa (destination) | |
|---|---|---|
| Application fee | $75–$115 (Per the Michigan State License Fee Act (MCL 338.2213): a $35 application processing fee plus a license fee of $40 per year, prorated for the time remaining in the biennial cycle (up to $80), so the amount due at initial licensure by endorsement runs roughly $75-$115. Biennial renewal is $80. (Statute lowers these to a $30 application processing fee and $20/year license fee after Sept 30, 2027.) Transmitting an NCEES Record costs $175 first board / $100 each additional, paid separately to NCEES) | $150 (Iowa application fee for licensure by comity (nonrefundable) per 193C IAC 2.1; a $15 initial PE certificate fee is charged separately, and transmitting an NCEES Record costs $175 for the first board and $100 for each additional board paid to NCEES) |
| Processing time | LARA/Board publishes no comity turnaround; out-of-state (endorsement) applications are reviewed by the Board of Professional Engineers. NCEES Record completion itself averages 2-3 weeks | The board publishes no comity turnaround; applications are reviewed against the same education/experience criteria used for PE exam eligibility (NCEES Record completion itself averages 2-3 weeks) |
| Licensing authority | Michigan Board of Professional Engineers (Department of Licensing and Regulatory Affairs, Bureau of Professional Licensing) | Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) |
The destination column is what you must satisfy — Iowa sets the rules for this move.
Step by step
- Confirm Iowa's current requirements on the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) website (linked below) — rules change.
- Submit the endorsement application to the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold an active license to practice engineering issued by another U.S. jurisdiction based on standards substantially equivalent to Iowa's.
- Submit an NCEES Record (accepted in lieu of references, transcripts, employment history, and exam verification) or provide those documents directly.
- Complete the notarized comity application and ethics questionnaire through the My Iowa PLB online portal.
- Show no disciplinary action; the board applies the same education/experience criteria used to judge PE exam eligibility.
- Pay the fees ($150 (Iowa application fee for licensure by comity (nonrefundable) per 193C IAC 2.1; a $15 initial PE certificate fee is charged separately, and transmitting an NCEES Record costs $175 for the first board and $100 for each additional board paid to NCEES)) and allow The board publishes no comity turnaround; applications are reviewed against the same education/experience criteria used for PE exam eligibility (NCEES Record completion itself averages 2-3 weeks).
Official links
Related guides
Frequently asked questions
Does Iowa accept a Michigan PE license?
A PE license transfers from Michigan to Iowa by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing), verify your Michigan license, and meet Iowa's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Iowa requires no separate state exam, though comity applicants must complete an ethics questionnaire (not a proctored exam).
Do I retake the FE or PE exam moving from Michigan to Iowa?
FE and PE exam results transfer through your NCEES Record and are not retaken; Iowa requires no separate state exam, though comity applicants must complete an ethics questionnaire (not a proctored exam).
What does the Michigan-to-Iowa comity application cost?
$150 (Iowa application fee for licensure by comity (nonrefundable) per 193C IAC 2.1; a $15 initial PE certificate fee is charged separately, and transmitting an NCEES Record costs $175 for the first board and $100 for each additional board paid to NCEES).
Can I keep my Michigan PE license after I'm licensed in Iowa?
Yes — PE licenses stack. Keep the Michigan license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- Iowa DIAL — Engineers & Land Surveyors: Comity ↗ (accessed 2026-07-21)
- Iowa Admin. Code 193C ch. 2 — Fees and Charges (comity $150; initial certificate $15) ↗ (accessed 2026-07-21)
- Iowa Admin. Code 481-1048.2 — Requirements for licensure by comity (recodified from 193C-4.2 eff. 6/24/26) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure) ↗ (accessed 2026-07-21)
- Michigan LARA — Engineers, Professional (Board page) ↗ (accessed 2026-07-21)
- Michigan MCL 338.2213 — Architect, Professional Engineer, or Land Surveyor; Fees (State License Fee Act) ↗ (accessed 2026-07-21)
- Michigan LARA — Professional Engineer Licensing Guide (PDF) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]