Skip to content
LicenseReciprocity

Engineering License from Michigan to Delaware: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: Delaware Association of Professional Engineers (DAPE) ↗

A PE license transfers from Michigan to Delaware by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Delaware Association of Professional Engineers (DAPE), verify your Michigan license, and meet Delaware's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Delaware requires no separate proctored jurisprudence exam, but comity applicants must complete an Ethics & Regulations questionnaire.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

Delaware grants PE licensure by comity, so a Professional Engineer licensed in Michigan does not start over — but does file a full Delaware application. Your Michigan license, ABET degree, qualifying experience, and FE and PE results reach the Delaware Association of Professional Engineers (DAPE) through your NCEES Record; the board's task is to confirm they meet Delaware's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; Delaware requires no separate proctored jurisprudence exam, but comity applicants must complete an Ethics & Regulations questionnaire. Two things govern your timeline: keeping your Michigan license active and unencumbered while the Delaware application is pending, and clearing any Delaware-specific exam or statutes review before the license issues.

What changes, Michigan → Delaware

Side-by-side: Michigan vs Delaware (Engineering (PE)), verified 2026-07-21
Michigan (current)Delaware (destination)
Application fee$75–$115 (Per the Michigan State License Fee Act (MCL 338.2213): a $35 application processing fee plus a license fee of $40 per year, prorated for the time remaining in the biennial cycle (up to $80), so the amount due at initial licensure by endorsement runs roughly $75-$115. Biennial renewal is $80. (Statute lowers these to a $30 application processing fee and $20/year license fee after Sept 30, 2027.) Transmitting an NCEES Record costs $175 first board / $100 each additional, paid separately to NCEES)$150 (DAPE PE application fee (payable by card online or by check to DAPE); after approval a $50 biennial registration fee is paid to place the license in active status. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)
Processing timeLARA/Board publishes no comity turnaround; out-of-state (endorsement) applications are reviewed by the Board of Professional Engineers. NCEES Record completion itself averages 2-3 weeksDAPE publishes no turnaround; the credentials committee reviews applications on the last Wednesday of each month and forwards recommendations to the Council meeting on the second Wednesday of the following month, so timing depends on when a complete application lands relative to those meetings
Licensing authorityMichigan Board of Professional Engineers (Department of Licensing and Regulatory Affairs, Bureau of Professional Licensing)Delaware Association of Professional Engineers (DAPE)

The destination column is what you must satisfy — Delaware sets the rules for this move.

Step by step

  1. Confirm Delaware's current requirements on the Delaware Association of Professional Engineers (DAPE) website (linked below) — rules change.
  2. Submit the endorsement application to the Delaware Association of Professional Engineers (DAPE) (application linked below).
  3. Arrange license verification from your current state via the verification system.
  4. Select the Comity application and hold an active PE license in another U.S. jurisdiction.
  5. Have NCEES transmit your NCEES Record to the Delaware board (Record holders complete an abbreviated application).
  6. Provide at least three professional references who are PEs in good standing (separate reference forms are waived when references are in your NCEES Record).
  7. Complete Delaware's Ethics & Regulations questionnaire covering the DE Professional Engineers Act, Code of Ethics, and DAPE Bylaws.
  8. Pay the fees ($150 (DAPE PE application fee (payable by card online or by check to DAPE); after approval a $50 biennial registration fee is paid to place the license in active status. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)) and allow DAPE publishes no turnaround; the credentials committee reviews applications on the last Wednesday of each month and forwards recommendations to the Council meeting on the second Wednesday of the following month, so timing depends on when a complete application lands relative to those meetings.

Official links

Related guides

Frequently asked questions

Does Delaware accept a Michigan PE license?

A PE license transfers from Michigan to Delaware by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Delaware Association of Professional Engineers (DAPE), verify your Michigan license, and meet Delaware's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Delaware requires no separate proctored jurisprudence exam, but comity applicants must complete an Ethics & Regulations questionnaire.

Do I retake the FE or PE exam moving from Michigan to Delaware?

FE and PE exam results transfer through your NCEES Record and are not retaken; Delaware requires no separate proctored jurisprudence exam, but comity applicants must complete an Ethics & Regulations questionnaire.

What does the Michigan-to-Delaware comity application cost?

$150 (DAPE PE application fee (payable by card online or by check to DAPE); after approval a $50 biennial registration fee is paid to place the license in active status. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES).

Can I keep my Michigan PE license after I'm licensed in Delaware?

Yes — PE licenses stack. Keep the Michigan license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]