Engineering License from Georgia to Wisconsin: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Examining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers — Professional Engineers Section (Wisconsin Department of Safety and Professional Services) ↗
A PE license transfers from Georgia to Wisconsin by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Examining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers — Professional Engineers Section (Wisconsin Department of Safety and Professional Services), verify your Georgia license, and meet Wisconsin's endorsement requirements. FE and PE exam results transfer through your NCEES Council Record (or state Verification of Examination/Registration form #475) and are not retaken; Wisconsin has no state-specific exam.
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Wisconsin grants PE licensure by comity, so a Professional Engineer licensed in Georgia does not start over — but does file a full Wisconsin application. Your Georgia license, ABET degree, qualifying experience, and FE and PE results reach the Examining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers — Professional Engineers Section (Wisconsin Department of Safety and Professional Services) through your NCEES Record; the board's task is to confirm they meet Wisconsin's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Council Record (or state Verification of Examination/Registration form #475) and are not retaken; Wisconsin has no state-specific exam. Two things govern your timeline: keeping your Georgia license active and unencumbered while the Wisconsin application is pending, and clearing any Wisconsin-specific exam or statutes review before the license issues.
What changes, Georgia → Wisconsin
| Georgia (current) | Wisconsin (destination) | |
|---|---|---|
| Application fee | $100 ($100 Professional or Structural Engineer Application by Comity fee (non-refundable) per the board's official fee schedule, plus a $5 processing fee for each online submission; transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES) | $55 (Wisconsin PE reciprocity/credential application fee is $55 (paid via the online LicensE portal). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES. The biennial renewal fee is billed separately.) |
| Processing time | ~4 weeks (The Georgia SOS How-To Guide states comity applications are generally processed within about 20 business days (~4 weeks) of a complete application, evaluated in order received; a deficiency notice restarts the 20-day count) | DSPS presents a completed reciprocity application to the Professional Engineers Section for review at its next scheduled meeting; no fixed turnaround is published, so timing depends on the board's meeting schedule. |
| Licensing authority | Georgia State Board of Registration for Professional Engineers and Land Surveyors (Georgia PELS Board) | Examining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers — Professional Engineers Section (Wisconsin Department of Safety and Professional Services) |
The destination column is what you must satisfy — Wisconsin sets the rules for this move.
Step by step
- Confirm Wisconsin's current requirements on the Examining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers — Professional Engineers Section (Wisconsin Department of Safety and Professional Services) website (linked below) — rules change.
- Submit the endorsement application to the Examining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers — Professional Engineers Section (Wisconsin Department of Safety and Professional Services) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold an unexpired PE registration in another state whose registration requirements are not lower than Wisconsin's.
- Have passed the NCEES FE and PE examinations and document 8 years of engineering experience (education included).
- Submit proof of 30 PDHs of continuing education within the 2 years before applying (exempt if first licensed as a PE within the last 2 years).
- Provide references from five registered Professional Engineers, one of whom served as supervisor in responsible charge of your work.
- Pay the fees ($55 (Wisconsin PE reciprocity/credential application fee is $55 (paid via the online LicensE portal). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES. The biennial renewal fee is billed separately.)) and allow DSPS presents a completed reciprocity application to the Professional Engineers Section for review at its next scheduled meeting; no fixed turnaround is published, so timing depends on the board's meeting schedule..
Official links
Related guides
Frequently asked questions
Does Wisconsin accept a Georgia PE license?
A PE license transfers from Georgia to Wisconsin by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Examining Board of Architects, Landscape Architects, Professional Engineers, Designers, Professional Land Surveyors, and Registered Interior Designers — Professional Engineers Section (Wisconsin Department of Safety and Professional Services), verify your Georgia license, and meet Wisconsin's endorsement requirements. FE and PE exam results transfer through your NCEES Council Record (or state Verification of Examination/Registration form #475) and are not retaken; Wisconsin has no state-specific exam.
Do I retake the FE or PE exam moving from Georgia to Wisconsin?
FE and PE exam results transfer through your NCEES Council Record (or state Verification of Examination/Registration form #475) and are not retaken; Wisconsin has no state-specific exam.
What does the Georgia-to-Wisconsin comity application cost?
$55 (Wisconsin PE reciprocity/credential application fee is $55 (paid via the online LicensE portal). Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid to NCEES. The biennial renewal fee is billed separately.).
Can I keep my Georgia PE license after I'm licensed in Wisconsin?
Yes — PE licenses stack. Keep the Georgia license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- Wisconsin DSPS — Professional Engineer Registration Application Information (#1736; reciprocity fee $55, 8 yrs experience) ↗ (accessed 2026-07-21)
- Wisconsin DSPS — PE Reciprocity Application PDH Table (#3084; Wis. Admin. Code A-E 13.09) ↗ (accessed 2026-07-21)
- Wisconsin DSPS — Professional Engineer profession page ↗ (accessed 2026-07-21)
- Georgia PELS Board — Fee Schedule (Rev. 3-4-2024): PE/SE Application by Comity $100 + $5 online processing ↗ (accessed 2026-07-21)
- Georgia SOS — How-To Guide: Professional Engineer Licensure ($100 comity fee; ~20 business days) ↗ (accessed 2026-07-21)
- NCEES — Georgia now requires NCEES Record for comity licensure ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]