Skip to content
LicenseReciprocity

Engineering License from Georgia to Hawaii: Does It Transfer? (2026)

Last verified: 2026-07-21 · source: Board of Professional Engineers, Architects, Surveyors and Landscape Architects (BPEASLA), DCCA Professional & Vocational Licensing (PVL) ↗

A PE license transfers from Georgia to Hawaii by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Board of Professional Engineers, Architects, Surveyors and Landscape Architects (BPEASLA), DCCA Professional & Vocational Licensing (PVL), verify your Georgia license, and meet Hawaii's endorsement requirements. FE and PE exam results transfer via your NCEES Council Record (or a state exam/license verification) and are not retaken; the FE may be waived for endorsement with 15 years of experience in responsible charge, but the PE exam requirement cannot be waived; structural licensure requires the 16-hour NCEES Structural exam; Hawaii has no separate state law exam.

Verify this exact pair in the checker

Same data, interactive — with share link and board links.

Run the Reciprocity Checker →

Verdict

Licensure by endorsement

Hawaii grants PE licensure by comity, so a Professional Engineer licensed in Georgia does not start over — but does file a full Hawaii application. Your Georgia license, ABET degree, qualifying experience, and FE and PE results reach the Board of Professional Engineers, Architects, Surveyors and Landscape Architects (BPEASLA), DCCA Professional & Vocational Licensing (PVL) through your NCEES Record; the board's task is to confirm they meet Hawaii's practice act, not to re-test you. FE and PE exam results transfer via your NCEES Council Record (or a state exam/license verification) and are not retaken; the FE may be waived for endorsement with 15 years of experience in responsible charge, but the PE exam requirement cannot be waived; structural licensure requires the 16-hour NCEES Structural exam; Hawaii has no separate state law exam. Two things govern your timeline: keeping your Georgia license active and unencumbered while the Hawaii application is pending, and clearing any Hawaii-specific exam or statutes review before the license issues.

What changes, Georgia → Hawaii

Side-by-side: Georgia vs Hawaii (Engineering (PE)), verified 2026-07-21
Georgia (current)Hawaii (destination)
Application fee$100 ($100 Professional or Structural Engineer Application by Comity fee (non-refundable) per the board's official fee schedule, plus a $5 processing fee for each online submission; transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES)$150 ($150 non-refundable endorsement application fee (payable to Commerce & Consumer Affairs), per the board's official application form. A separate license-issuance fee is assessed after approval and prorated to the biennium (engineer licenses expire April 30 of even-numbered years): license $64, Compliance Resolution Fund $50 or $100, plus up to a $52 half-period renewal. Transmitting an NCEES Record costs $175 first board / $100 each additional, paid to NCEES)
Processing time~4 weeks (The Georgia SOS How-To Guide states comity applications are generally processed within about 20 business days (~4 weeks) of a complete application, evaluated in order received; a deficiency notice restarts the 20-day count)The board does not publish a comity turnaround; an application is deemed abandoned if not completed within one year of filing (HRS 436B-9)
Licensing authorityGeorgia State Board of Registration for Professional Engineers and Land Surveyors (Georgia PELS Board)Board of Professional Engineers, Architects, Surveyors and Landscape Architects (BPEASLA), DCCA Professional & Vocational Licensing (PVL)

The destination column is what you must satisfy — Hawaii sets the rules for this move.

Step by step

  1. Confirm Hawaii's current requirements on the Board of Professional Engineers, Architects, Surveyors and Landscape Architects (BPEASLA), DCCA Professional & Vocational Licensing (PVL) website (linked below) — rules change.
  2. Submit the endorsement application to the Board of Professional Engineers, Architects, Surveyors and Landscape Architects (BPEASLA), DCCA Professional & Vocational Licensing (PVL) (application linked below).
  3. Arrange license verification from your current state via the verification system.
  4. Hold and verify at least one current PE license in another U.S. jurisdiction (via NCEES Council Record or a Verification of Exam/License form sent directly from the original state board).
  5. Apply in a specific discipline — Hawaii licenses by discipline, and civil and structural engineering are separate and distinct.
  6. Meet Hawaii's education-and-experience standard (e.g., an approved/ABET bachelor's degree plus 4 years of experience), or document 15 years in responsible charge to waive the FE exam.
  7. Disclose any disciplinary action or convictions and provide a Social Security Number.
  8. Pay the fees ($150 ($150 non-refundable endorsement application fee (payable to Commerce & Consumer Affairs), per the board's official application form. A separate license-issuance fee is assessed after approval and prorated to the biennium (engineer licenses expire April 30 of even-numbered years): license $64, Compliance Resolution Fund $50 or $100, plus up to a $52 half-period renewal. Transmitting an NCEES Record costs $175 first board / $100 each additional, paid to NCEES)) and allow The board does not publish a comity turnaround; an application is deemed abandoned if not completed within one year of filing (HRS 436B-9).

Official links

Related guides

Frequently asked questions

Does Hawaii accept a Georgia PE license?

A PE license transfers from Georgia to Hawaii by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Board of Professional Engineers, Architects, Surveyors and Landscape Architects (BPEASLA), DCCA Professional & Vocational Licensing (PVL), verify your Georgia license, and meet Hawaii's endorsement requirements. FE and PE exam results transfer via your NCEES Council Record (or a state exam/license verification) and are not retaken; the FE may be waived for endorsement with 15 years of experience in responsible charge, but the PE exam requirement cannot be waived; structural licensure requires the 16-hour NCEES Structural exam; Hawaii has no separate state law exam.

Do I retake the FE or PE exam moving from Georgia to Hawaii?

FE and PE exam results transfer via your NCEES Council Record (or a state exam/license verification) and are not retaken; the FE may be waived for endorsement with 15 years of experience in responsible charge, but the PE exam requirement cannot be waived; structural licensure requires the 16-hour NCEES Structural exam; Hawaii has no separate state law exam.

What does the Georgia-to-Hawaii comity application cost?

$150 ($150 non-refundable endorsement application fee (payable to Commerce & Consumer Affairs), per the board's official application form. A separate license-issuance fee is assessed after approval and prorated to the biennium (engineer licenses expire April 30 of even-numbered years): license $64, Compliance Resolution Fund $50 or $100, plus up to a $52 half-period renewal. Transmitting an NCEES Record costs $175 first board / $100 each additional, paid to NCEES).

Can I keep my Georgia PE license after I'm licensed in Hawaii?

Yes — PE licenses stack. Keep the Georgia license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.

Sources

Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.

Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21

How we verify · All sources · spot an error? [email protected]