Engineering License from California to Rhode Island: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Rhode Island Board of Registration for Professional Engineers ↗
A PE license transfers from California to Rhode Island by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Rhode Island Board of Registration for Professional Engineers, verify your California license, and meet Rhode Island's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Rhode Island requires no state-specific engineering exam for comity (an FE-exam waiver is available to qualifying experienced applicants under R.I. Gen. Laws 5-8-11(a)(4)(i)).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Rhode Island grants PE licensure by comity, so a Professional Engineer licensed in California does not start over — but does file a full Rhode Island application. Your California license, ABET degree, qualifying experience, and FE and PE results reach the Rhode Island Board of Registration for Professional Engineers through your NCEES Record; the board's task is to confirm they meet Rhode Island's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; Rhode Island requires no state-specific engineering exam for comity (an FE-exam waiver is available to qualifying experienced applicants under R.I. Gen. Laws 5-8-11(a)(4)(i)). Two things govern your timeline: keeping your California license active and unencumbered while the Rhode Island application is pending, and clearing any Rhode Island-specific exam or statutes review before the license issues.
What changes, California → Rhode Island
| California (current) | Rhode Island (destination) | |
|---|---|---|
| Application fee | $175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026)) | $150 (Comity PE application fee (R.I. Rules & Regs 430-RICR-00-00-1); a $300 PE certificate of registration (initial registration) fee is due on issuance and biennial renewal is also $300. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.) |
| Processing time | No board-published comity turnaround; the application undergoes technical review and the applicant becomes eligible for any required state-specific exams (offered in limited quarterly windows) only after that review is approved, so total time varies widely | The board does not publish a comity turnaround; a complete NCEES Record must be transmitted to the board before review (NCEES Record completion itself averages 2-3 weeks). |
| Licensing authority | California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) | Rhode Island Board of Registration for Professional Engineers |
The destination column is what you must satisfy — Rhode Island sets the rules for this move.
Step by step
- Confirm Rhode Island's current requirements on the Rhode Island Board of Registration for Professional Engineers website (linked below) — rules change.
- Submit the endorsement application to the Rhode Island Board of Registration for Professional Engineers (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold a current PE registration in another U.S. jurisdiction based on comparable NCEES examinations.
- Establish and transmit a complete NCEES Record (education, exams, experience, references) to the board as required by R.I. Gen. Laws 5-8-11.
- Meet one of the board's five education/experience pathways (e.g., EAC/ABET degree plus four years; ETAC/ABET plus eight years; non-accredited degrees 6-12 years).
- Qualifying experience must be obtained under the supervision of a PE registered in a U.S. jurisdiction.
- Pay the fees ($150 (Comity PE application fee (R.I. Rules & Regs 430-RICR-00-00-1); a $300 PE certificate of registration (initial registration) fee is due on issuance and biennial renewal is also $300. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.)) and allow The board does not publish a comity turnaround; a complete NCEES Record must be transmitted to the board before review (NCEES Record completion itself averages 2-3 weeks)..
Official links
Related guides
Frequently asked questions
Does Rhode Island accept a California PE license?
A PE license transfers from California to Rhode Island by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Rhode Island Board of Registration for Professional Engineers, verify your California license, and meet Rhode Island's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Rhode Island requires no state-specific engineering exam for comity (an FE-exam waiver is available to qualifying experienced applicants under R.I. Gen. Laws 5-8-11(a)(4)(i)).
Do I retake the FE or PE exam moving from California to Rhode Island?
FE and PE exam results transfer through your NCEES Record and are not retaken; Rhode Island requires no state-specific engineering exam for comity (an FE-exam waiver is available to qualifying experienced applicants under R.I. Gen. Laws 5-8-11(a)(4)(i)).
What does the California-to-Rhode Island comity application cost?
$150 (Comity PE application fee (R.I. Rules & Regs 430-RICR-00-00-1); a $300 PE certificate of registration (initial registration) fee is due on issuance and biennial renewal is also $300. Transmitting an NCEES Record costs $175 for the first board and $100 for each additional board, paid separately to NCEES.).
Can I keep my California PE license after I'm licensed in Rhode Island?
Yes — PE licenses stack. Keep the California license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- R.I. Rules & Regs 430-RICR-00-00-1 (fee schedule; comity registration procedures) ↗ (accessed 2026-07-21)
- RI Division of Design Professionals - Professional Engineers ↗ (accessed 2026-07-21)
- NCEES - Records Program (comity licensure) ↗ (accessed 2026-07-21)
- California BPELSG — Application Fees (PE $175, rising to $250 on 7/1/2026; state exam fees) ↗ (accessed 2026-07-21)
- California BPELSG — Licensee Fee Schedule (renewal $180 -> $250 on 7/1/2026) ↗ (accessed 2026-07-21)
- California BPELSG — PE Application Instructions (Laws & Rules exam; comity NCEES Record option) ↗ (accessed 2026-07-21)
- California BPELSG — Professional Engineer Application overview (comity applicants) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]