Engineering License from California to Iowa: Does It Transfer? (2026)
Last verified: 2026-07-21 · source: Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) ↗
A PE license transfers from California to Iowa by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing), verify your California license, and meet Iowa's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Iowa requires no separate state exam, though comity applicants must complete an ethics questionnaire (not a proctored exam).
Verify this exact pair in the checker
Same data, interactive — with share link and board links.
Verdict
Licensure by endorsement
Iowa grants PE licensure by comity, so a Professional Engineer licensed in California does not start over — but does file a full Iowa application. Your California license, ABET degree, qualifying experience, and FE and PE results reach the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) through your NCEES Record; the board's task is to confirm they meet Iowa's practice act, not to re-test you. FE and PE exam results transfer through your NCEES Record and are not retaken; Iowa requires no separate state exam, though comity applicants must complete an ethics questionnaire (not a proctored exam). Two things govern your timeline: keeping your California license active and unencumbered while the Iowa application is pending, and clearing any Iowa-specific exam or statutes review before the license issues.
What changes, California → Iowa
| California (current) | Iowa (destination) | |
|---|---|---|
| Application fee | $175–$250 (Board PE application fee was $175 and rose to $250 effective July 1, 2026 (amended 16 CCR sec. 407); because the 2026-07-21 data date is after that effective date, $250 is the operative amount, though the official fee page still labeled $175 as 'current' at access — confirm the operative amount. Civil applicants also pay the Board's Seismic Principles and Engineering Surveying exam fees ($175 each, rising to $250 each on 7/1/2026). NCEES Record transmittal is $175 first board / $100 each additional, paid separately to NCEES; biennial renewal is $180 (rising to $250 on 7/1/2026)) | $150 (Iowa application fee for licensure by comity (nonrefundable) per 193C IAC 2.1; a $15 initial PE certificate fee is charged separately, and transmitting an NCEES Record costs $175 for the first board and $100 for each additional board paid to NCEES) |
| Processing time | No board-published comity turnaround; the application undergoes technical review and the applicant becomes eligible for any required state-specific exams (offered in limited quarterly windows) only after that review is approved, so total time varies widely | The board publishes no comity turnaround; applications are reviewed against the same education/experience criteria used for PE exam eligibility (NCEES Record completion itself averages 2-3 weeks) |
| Licensing authority | California Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG) | Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) |
The destination column is what you must satisfy — Iowa sets the rules for this move.
Step by step
- Confirm Iowa's current requirements on the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) website (linked below) — rules change.
- Submit the endorsement application to the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing) (application linked below).
- Arrange license verification from your current state via the verification system.
- Hold an active license to practice engineering issued by another U.S. jurisdiction based on standards substantially equivalent to Iowa's.
- Submit an NCEES Record (accepted in lieu of references, transcripts, employment history, and exam verification) or provide those documents directly.
- Complete the notarized comity application and ethics questionnaire through the My Iowa PLB online portal.
- Show no disciplinary action; the board applies the same education/experience criteria used to judge PE exam eligibility.
- Pay the fees ($150 (Iowa application fee for licensure by comity (nonrefundable) per 193C IAC 2.1; a $15 initial PE certificate fee is charged separately, and transmitting an NCEES Record costs $175 for the first board and $100 for each additional board paid to NCEES)) and allow The board publishes no comity turnaround; applications are reviewed against the same education/experience criteria used for PE exam eligibility (NCEES Record completion itself averages 2-3 weeks).
Official links
Related guides
Frequently asked questions
Does Iowa accept a California PE license?
A PE license transfers from California to Iowa by endorsement — there is no automatic reciprocity, but you do not start over. Apply to the Iowa Engineering and Land Surveying Examining Board (Iowa Department of Inspections, Appeals & Licensing), verify your California license, and meet Iowa's endorsement requirements. FE and PE exam results transfer through your NCEES Record and are not retaken; Iowa requires no separate state exam, though comity applicants must complete an ethics questionnaire (not a proctored exam).
Do I retake the FE or PE exam moving from California to Iowa?
FE and PE exam results transfer through your NCEES Record and are not retaken; Iowa requires no separate state exam, though comity applicants must complete an ethics questionnaire (not a proctored exam).
What does the California-to-Iowa comity application cost?
$150 (Iowa application fee for licensure by comity (nonrefundable) per 193C IAC 2.1; a $15 initial PE certificate fee is charged separately, and transmitting an NCEES Record costs $175 for the first board and $100 for each additional board paid to NCEES).
Can I keep my California PE license after I'm licensed in Iowa?
Yes — PE licenses stack. Keep the California license active (its renewal and continuing-education/PDH clock run separately) and you hold both. Engineers working near state lines or nationally routinely carry several PE licenses at once, all sourced from a single NCEES Record.
Sources
Primary sources only — official boards and compact commissions. Data last verified 2026-07-21.
- Iowa DIAL — Engineers & Land Surveyors: Comity ↗ (accessed 2026-07-21)
- Iowa Admin. Code 193C ch. 2 — Fees and Charges (comity $150; initial certificate $15) ↗ (accessed 2026-07-21)
- Iowa Admin. Code 481-1048.2 — Requirements for licensure by comity (recodified from 193C-4.2 eff. 6/24/26) ↗ (accessed 2026-07-21)
- NCEES — Records Program (comity licensure) ↗ (accessed 2026-07-21)
- California BPELSG — Application Fees (PE $175, rising to $250 on 7/1/2026; state exam fees) ↗ (accessed 2026-07-21)
- California BPELSG — Licensee Fee Schedule (renewal $180 -> $250 on 7/1/2026) ↗ (accessed 2026-07-21)
- California BPELSG — PE Application Instructions (Laws & Rules exam; comity NCEES Record option) ↗ (accessed 2026-07-21)
- California BPELSG — Professional Engineer Application overview (comity applicants) ↗ (accessed 2026-07-21)
Reviewed by Billy Reiner, Editor · verified against primary sources 2026-07-21
How we verify · All sources · spot an error? [email protected]